PV2R33-60-60 double vane pump parameter manual and instructions
The PV2R series vane pumps are high-pressure, high-performance hydraulic pumps designed for low-noise operation. These fixed-displacement vane pumps have a wide range of applications, particularly those requiring high performance and stable operation, such as injection molding machines. This article details the specifications and operating instructions for the PV2R33-60-60 vane pump.
1. PV2R Series Vane Pump Overview
① Serial Number and Pump Code
Serial Number: PV2R Series
Pump Code: Depending on the model, the pump code is 1,2,3,4.
② Pump Displacement
PV2R series vane pumps have a wide range of displacements, including 6-237 and other types.
③ Mounting Type
F: Flange Mount
L: Base Mount
④ Rotation Direction
R: Clockwise
L: Counterclockwise
⑤ Oil Discharge and Inlet Orientation
A: Top (Standard)
B: Bottom
R: Right
L: Left
⑥ Design Number
Common design numbers include 4222, 41, 40, 31, and 30.
2. Specific Model Specifications
Pump Code: 33
Displacement: 59.6 cm³/rev
Mounting Type: Determined by model suffix (typically flange or base mount)
Rotation Direction: Determined by model suffix (typically clockwise or counterclockwise)
Oil discharge and suction port directions: Determined by the model number suffix (following the A, B, R, and L designation).
Design number: Determined by the model number suffix (usually 4222 or similar).
Instructions
① Installation and Commissioning
Ensure that the double hydraulic pump is mounted in accordance with design requirements (flange or base mount).
Check that the pump's rotation direction is consistent with system design requirements.
Before debugging, make sure the pump is filled with working oil and check whether the cleanliness and viscosity of the oil meet the requirements.
② Operation and Maintenance
During operation, regularly check the operating pressure, temperature, and oil viscosity of the PV2R33 vane pump.
Maintain oil cleanliness and regularly replace and clean the oil filter.
Regularly check the pump's oil inlet to ensure it is free of blockage and leaks.
If any abnormal pump operation or increased noise is detected, immediately stop the pump for inspection.