Hydraulic oil pump T6CCW-017-017-2R00-C100 model analysis and application

1. T6CCW-017-017-2R00-C100 model analysis

T6: series code.

CC: Cartridge kit specification series code, the first digit is the near-axis end P1 pump core specification series code, the second digit is the far-axis end P2 pump core specification series code.

W: Auxiliary type code, using heavy-duty drive shaft, only applicable to T6CC, T6CC*, T6DC and T6DC*.

017: Represents T6CCW vane pump cartridge kit specifications.

017: represents the hydraulic oil pump cartridge kit specifications.

2: Double hydraulic pump drive shaft type.

R: Turning mode, R means turn right.

00: Vane hydraulic pump oil port direction configuration.

C: Design serial number.

1: Sealing level.

00: Modification code, a code given by the manufacturer when the product is partially modified to meet special requirements.

2. T6CCW-017-017-2R00-C100 key parameters

Displacement: 58.3 ml/rev.

Maximum pressure: intermittent pressure: 210 bar, continuous pressure: 175 bar.

Speed range: 600-1800 rpm.

3. T6CCW-017-017-2R00-C100 Application

Industrial hydraulic systems (such as machine tools, injection molding machines).

Mobile equipment (cranes, excavators).

Scenarios with high pressure and high reliability requirements.

4. T6CCW-017-017-2R00-C100 common problems

Noise/vibration: oil contamination, cavitation, misaligned installation.

Insufficient pressure: internal leakage due to wear, overflow valve failure, low pump speed.

Leakage: aging of seals, cracks in the housing.

Excessive oil temperature: system overload, insufficient cooling, improper oil viscosity.

5. T6CCW-017-017-2R00-C100 Maintenance Recommendations

Use hydraulic oil of the recommended viscosity grade (e.g. ISO VG46).

Replace the filter element regularly to keep the oil clean.

Check the coupling alignment to avoid excessive axial/radial loads.

When storing spare pumps, fill them with oil to prevent rust.