T6C-010-2R01-B1 Vane Pump Instructions
1. Product features:
① High performance
High working pressure: T6C-010-2R01-B1 vane pump T can work stably under high pressure environment, with the maximum working pressure reaching 280 bar, meeting various high pressure application requirements.
High volumetric efficiency: The typical volumetric efficiency is higher than 94%, which reduces energy loss and heat generation and improves the overall efficiency of the system.
High mechanical efficiency: The mechanical efficiency is also as high as over 94%, further reducing power loss.
② Wide range of work
Wide speed range: Applicable to the speed range of 600 rpm to 3600 rpm, combined with the large-displacement pump core design, it can form a low-noise, large-displacement hydraulic system.
Low speed, low pressure and high viscosity working performance: T6C high pressure vane pump can work stably under low speed (as low as 600 rpm), low pressure and high viscosity (up to 860 cSt) conditions, adapting to various working conditions.
③ Durability and reliability
Long life: The double-lip structure blades have strong anti-pollution ability and extend the service life of the hydraulic oil pump.
Strong resistance to solid particle pollution: effectively resists solid particle pollution in the working medium, improving the stability and reliability of the system.
④ Rich installation and configuration options
Various installation forms: supports a variety of installation forms, which is convenient for users to choose and configure according to actual needs.
Rich structural parameters: pump core displacement, transmission shaft form, oil port configuration, etc. can all be customized according to user needs.
2. Technical specifications
Model: T6C-010-2R01-B1
Displacement: 34.1 ml/rev
Working pressure: up to 280 bar
Speed range: 600 rpm to 2800 rpm
Applicable medium: hydraulic oil
Applicable temperature: 30-90℃
Installation form: flange installation
3. Installation and Operation
Installation
Check the installation environment: Make sure the installation environment meets the working requirements of the pump, including temperature, humidity, vibration, etc.
Installation location: Select a suitable installation location to ensure that the pump body is stable and avoid vibration and impact.
Connect the pipeline: According to the product drawings and instructions, correctly connect the inlet and outlet pipelines to ensure good sealing.
Electrical connection: For pumps that require electrical drive, make electrical connections according to the electrical drawings to ensure that the wiring is correct.
Operation
Pre-start inspection: Check whether the oil level, oil temperature, and oil quality meet the requirements, and ensure that there are no impurities in the pump body.
Start: Start the pump according to the equipment operating procedures, observe the operation of the pump, and ensure that there are no abnormal sounds and vibrations.
Operation monitoring: During operation, regularly check the working status of the vane hydraulic pump and parameters such as oil temperature and oil pressure to ensure stable operation of the system.