Vane Oil Pump 20V-14A-1C-22R, 20V-14A-1B-22R Installation Instructions and Model Parameters
1. Model Specifications
① Single Vane Pump 20V-14A-1B-22R
Brand: YIHE
Type: High-Performance Fixed-Displacement Vane Pump
Maximum Pressure: 138 bar
Speed Range: 600-1800 rpm
Weight: 12 kg
Temperature Range: -25°C to 120°C
Noise Level: 52 dB
Mounting Socket: 32 mm
Outlet: G-Thread or Flange
② Single Vane Pump 20V-14A-1C-22R
Brand: YIHE
Type: High-Performance Fixed-Displacement Vane Pump
Maximum Pressure: 138 bar
Speed Range: 600-1800 rpm
Weight: 12 kg
Temperature Range: -25°C to 120°C
Casing Material: Cast Iron
Noise Level: 52 dB
Mounting Socket: 32 mm
Outlet: G-Thread or Flange
2. Installation Instructions
① Pre-installation Preparation
Ensure the installation environment is clean and free of debris and dust.
Inspect the oil pump and its accessories for intact condition. Replace any damage promptly.
Prepare the necessary installation tools and materials.
② Installation Steps
Positioning and Securing: Place the oil pump in the desired location and securely fasten it to the foundation using bolts or other fasteners.
Connecting Pipes: Connect the corresponding suction and discharge pipes according to the pump's inlet and outlet locations. Ensure the pipe connections are tight and leak-free.
Electrical Connections: Connect the oil pump's power and control cables according to the electrical wiring diagram. Ensure the wiring is correct, secure, and complies with electrical safety regulations.
Inspection and Commissioning: After installation, thoroughly inspect the oil pump to ensure all components are properly installed and not loose. Then, perform commissioning to test the pump's operation and performance parameters to ensure they meet requirements.
③ Precautions
During installation, strictly adhere to the installation instructions and precautions in the product manual.
Avoid excessive shock and vibration from the oil pump to prevent it from affecting its performance and lifespan. Regularly check the operation and performance parameters of the oil pump, and deal with any abnormalities in a timely manner.
3. Maintenance and Repair Summary
Regularly check the oil pump's oil quality and quantity to ensure it's clean, free of impurities, and maintained within the specified level range.
Regularly replace the pump's filter and seals to prevent clogging and leakage.
Regularly check the pump's moving parts, such as bearings and gears, for wear and replace any signs of wear.
Regularly clean and maintain the pump to extend its service life.
In summary, the 20V-14A-1C-22R and 20V-14A-1C-22R vane pumps offer excellent performance and reliability, making them suitable for a wide range of mechanical equipment and hydraulic systems. During installation and use, strictly adhere to the requirements and precautions in the product manual to ensure proper operation and performance of the pump. Regular maintenance and servicing are also important measures to extend the service life of single oil pumps.