• Tokimec Type SQP3-38 Hydraulic System Single Vane Pump
  • Tokimec Type SQP3-38 Hydraulic System Single Vane Pump
  • Tokimec Type SQP3-38 Hydraulic System Single Vane Pump

Tokimec Type SQP3-38 Hydraulic System Single Vane Pump

Brand: YiHe

Product origin: China

Delivery time: 10-30day

Supply capacity: 300 Pcs/Day

Model: SQP3-38-(1A 1B 1C 1D)-18
Max Displacement: 118 ml/rev
Max Working Pressure: 17.2 Mpa
Shaft Speed Range: 600-1800 r/min
Rotation: Right and Left From Shaft End
Control Type: DOSING PUMP
Product Type: Vane Pump

Tokimec Type SQP3-38 Hydraulic System Single Vane Pump

Facing Workshop Stalls Due to a Worn Tokimec SQP3-38 Pump? Restore Full Hydraulic Power in 48 Hours!

When a primary hydraulic vane pump loses holding pressure, suffers internal slippage, or produces harsh cavitation noise on your plastic injection molding machine, die-casting unit, hydraulic press, or industrial machine tool, waiting 12 to 16 weeks for expensive imported original Tokimec (Tokyo Keiki) pumps halts your production and erodes operational margins.

Our premium Tokimec Tokyo Keiki Compatible SQP3-38 Low-Noise Single Hydraulic Vane Pump provides a 100% mechanical "drop-in" physical replacement. Manufactured in our ISO-certified production facility with micro-tolerance profiling, this pump delivers smooth 120.8 cm³/rev displacement and 210 bar peak pressure stability—reducing procurement and MRO replacement costs by up to 70%.

  • 100% Physical Form Match: Standard mounting flange, drive shaft geometry, and SAE 4-bolt port interfaces align with original Tokimec specifications for direct bolt-on installation without line modifications.

  • Direct Factory Dispatch: Units are pre-assembled from inventory stock, dynamically tested under full load up to 210 bar, and shipped globally within 24-48 hours to minimize plant downtime.

Technical Specifications & Operational Parameters

Cross-verify your equipment's operating pressure limits, rotational speed range, and mounting envelope against our technical specifications table below:

Parameter AttributeEngineering Specification ValueApplication System Advantage
Geometric Displacement120.8 cm³/rev (ml/r Nominal Code 38)High displacement output for main injection, clamping cylinders, and heavy pressing strokes.
Max Operating Pressure17.5 MPa (175 bar / 2500 PSI Continuous) / 21.0 MPa (210 bar Peak)Heavy-wall ductile iron housing prevents internal deformation under cyclic pressure shocks.
Operating Speed Range600 - 1800 r/min (RPM Continuous Range)Directly driven by 4-pole or 6-pole standard induction motors and variable speed drivers.
Average Operational NoiseStrictly Under 64 dB(A) at Full PressureLow-pulsation 12-vane rotor design ensures quiet indoor operation for machine shop floors.
Volumetric Efficiency≥ 92% Across Operating Pressure BandPrecision micro-clearances reduce internal bypass, limiting heat buildup in the reservoir.

Model Ordering Nomenclature Decoded: SQP3-38

Code SegmentTechnical Specification MeaningSystem Alignment & Field Verification
SQP3Super Quiet Single Vane Pump Series (Frame Size 3 Envelope)Establishes standardized physical envelope, pilot circle, and bolt mounting pattern.
38Nominal Displacement Flow Code: 120.8 cm³/rev (ml/r)Sets standard continuous delivery volume calculations per motor revolution.
Mounting / ShaftSAE 2-Bolt Flange & SAE Straight Keyed ShaftDirectly mates with motor bells and flexible couplings with zero backlash.
Ports LayoutSAE 4-Bolt Flange Connections (Suction / Pressure)Standard suction and pressure flange ports matching factory hydraulic plumbing.

Precision Tooling: Engineered for Quiet, Long-Life Duty Under 210 Bar

Hydraulic vane pumps operating in closed industrial plants face continuous duty cycles, thermal expansion stresses, and acoustic regulations. Standard commercial replacement pumps often exhibit uneven cam profiling, leading to excessive vane chatter, oil leakage, and noise spikes. We resolve these failure modes directly on our manufacturing lines:

  • Acoustically Optimized Cam Profiling: Our SQP3 cam rings are finished on dedicated CNC profile grinders with specialized acceleration/deceleration transition curves, minimizing flow ripple and keeping noise levels strictly below 64 dB(A).

  • Hydrostatically Balanced 12-Vane Cartridge: Precision intra-vane geometry balances tip pressures against the cam ring track, reducing mechanical wear and maintaining high volumetric efficiency (>92%) across full pressure cycles.

  • 100% Full-Load Calibration Testing: Every individual SQP3-38 pump undergoes comprehensive bench testing on our automated test stand, verifying continuous pressure rating, flow stability, and zero leakage before packing.

Pro Maintenance Insight: Escape the Hostile "Sandpaper Effect"

When should you replace your hydraulic pump? If your system exhibits delayed cylinder actuation, unstable pressure holding during mold clamp, abnormal pump body heating, or elevated whining noise, internal vane track wear has compromised pump performance.

CRITICAL FLUID SYSTEM REPLACEMENT REGULATION: Precision vane pumps rely on sub-micron operational clearances between the cam ring, rotor slots, and wear plates. When a previous pump fails, hardened microscopic metallic debris is circulated throughout the reservoir, manifold block, and proportional valves.

If maintenance teams install a replacement pump without thoroughly flushing the circuit, these residual metal particles circulate into the new cartridge—producing a destructive "sandpaper effect". These abrasive contaminants will rapidly score the cam profile and plate surfaces, causing premature bypass leakage and failure within hours.

Mandatory Procedure: Thoroughly drain and flush the oil tank, clean or replace suction strainers, blow out main supply lines, and install a fresh 10-micron absolute return line filter concurrently with the new pump installation.

Frequently Asked Questions: Tokimec SQP3 Series Replacement Pumps

1. Is this SQP3-38 vane pump 100% drop-in interchangeable with original Tokimec / Tokyo Keiki pumps? +
Yes, 100%. Our replacement single vane pump is built strictly to original Tokimec Tokyo Keiki SQP3 series dimensional and hydrodynamic standards. Mounting pilot circles, SAE 2-bolt flange dimensions, drive shaft configurations, inlet suction and discharge outlet port locations match the original footprint identically, allowing direct replacement with zero piping rework.
2. Why is the Tokimec SQP series widely preferred for injection molding machines and machine tools? +
The SQP series (Super Quiet Pump) features a balanced 12-vane rotor architecture and optimized discharge port timing. This design suppresses fluid pulsation and pressure ripple, keeping operating sound strictly under 64 dB(A). It is ideal for indoor factory environments, plastic injection machinery, die-casting clamping circuits, and precision CNC hydraulic stations.
3. Can replacement cartridge kits be purchased separately for fast field overhauls? +
Yes. The SQP3-38 utilizes a fully modular cartridge kit architecture (rotor, 12 vanes, cam ring, and port plates). If the housing remains undamaged, maintenance personnel can install a drop-in replacement cartridge kit on-site in under 15 minutes without uncoupling the pump from the main hydraulic manifold.

Request Direct Factory Wholesale Pricing Now

Looking to eliminate third-party distributor markups and overseas lead time bottlenecks? Source precision-built, low-noise SQP3-38 single vane pumps directly from our manufacturing line today.

Get An Instant Factory Price Quote
Related Products6
Product Tag
Get the latest price? We'll respond as soon as possible(within 12 hours)